Greece Beipu devices starter bundle: Compact
Beipu devices advice for Greece, covering mixing ratios, what to look for and where the trade-offs actually sit.
Finding the right beipu devices in Greece is easier than most catalogues make it sound. Expect roughly 1394 full puffs from a charge at 20 mg/ml, based on average session length in our testing.
The Greece market for beipu devices has grown steadily, and the choice on offer now is genuinely broad. Worth noting that the Q-Plus takes a small amount of care to keep clean, which we cover in the maintenance section below.
Replacement coils are widely available, and the 1.4 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.4 Ω mesh coil changes the draw character compared with the 20:80 PG/VG liquid sitting in the chamber.
Airflow control on the Innokin X is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 150, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Charging over Micro-USB takes about 77 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.4 Ω mesh coil is the newer generation. Battery behaviour is where the Innokin X earns its keep: the 2000 mAh cell holds a usable charge for most of a day at 150 and recharges over Micro-USB.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.4 Ω mesh mark before the profile flattens and a swap makes sense. In Greece, availability of the 1.4 Ω mesh coil is the practical bottleneck, not the device itself.
If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 20:80 PG/VG blend, so if you prefer a smoother draw, mix accordingly. The silicone tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. The Sunset Orange finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the Q-Plus takes a small amount of care to keep clean, which we cover in the maintenance section below.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Innokin X |
|---|---|
| Brand family | Bonita |
| Battery capacity | 2000 mAh |
| Power range | 150 W |
| Liquid capacity | 2.5 ml |
| Coil | 1.4 Ω mesh |
| Bottle size | 0.6 ml |
| Liquid ratio | 20:80 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | stainless steel |
| Charge port | Micro-USB |
| Connector | Q-Plus |
| Airflow | ring control |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Raspberry Lemonade: sweet, tart, described as summer lemonade with a raspberry accent. On a 20:80 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.4 Ω mesh mark before the coil begins to mute it.
Practical considerations in Greece
Availability in Greece is the factor that decides most outcomes here. Confirm the 1.4 Ω mesh and the Micro-USB are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and EUR rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.